Can I operate an LD8 with both the WebUI and Quantum? How do I change my LD8 IP address? How do I change the PPP Mode of the LD8? How do I check if my LD8 (with WebUI) is enabled or disabled? How do I check or change my LD8 L-band beam? How do I configure an LD8 to output Veripos RTCM? How do I configure my PC to connect to a LD8? How do I configure RTK Correction input for an LD8? How do I download all LD8 data logs? How do I find my LD8 IP address? How do I log into my LD8? What direction is the heading on my LD8? What is the PPS voltage and pulse width of my LD8? What ports are available for LD8 TCP/IP connections? Where do I find my LD8 unit ID?
How do I download all LD8 data logs?
Downloading all logged data files from an LD8 can be done using an FTP file transfer utility such as FileZilla. This can be done by following the steps below ( using the example FTP client Filezilla:
- Connect the LD8 to a PC or Laptop using an ethernet cable and ensure that the LD8 and the PC are on the same IP subnet.
- Launch FileZilla and enter the IP address of the LD8 in the Host box then click Quickconnect. This will establish the connection with the LD8 unit.
- Once the connection is established, the LD8 logged files will appear in the bottom left frame of FileZilla. Click inside this box then press Ctrl + A on the keyboard to select all files.
- Drag and drop the selected files to the required folder in opposite left hand frame. Once the transfer is complete, FileZilla will prompt a notification to confirm the successful transfer.