How do I enable/disable my LD3/LD3S?

Note: This description assumes that an external computer, running the VERIPOS L-Band Control 2 software, is already connected to the LD3/LD3S.

VERIPOS correction signals are provided as a chargeable service. If an LD3/LD3S is disabled, it will not output RTCM corrections or positions. The unit can be enabled by contacting the VERIPOS Helpdesk.

Note: The VERIPOS Helpdesk can only issue activations if a Service Access License (SAL) exists and the license number can be determined. Licenses must be pre-arranged between the user’s company and the VERIPOS Operations Department.

The LD3S can only be enabled if it is receiving L-band signals from a geo-stationary satellite. Ensure the Sync indicator is illuminated before contacting VERIPOS Helpdesk to enable or disable unit. The ID indicator will be off when the unit is first switched on. It will not be illuminated until the unit has locked to the L-band signal. (Sync indicator illuminated.)

Checking Current Status

The current unit status can be determined from the “ID” LED on the front panel.

ID LED is on and solid  (LD3S is ENABLED)
ID LED is extinguished (LD3S is DISABLED)

Determine Unit Code and Service

To enable (or disable) the unit, the user must be locked to a L-band beam to allow for receipt of activation (deactivation) sent by the VERIPOS Helpdesk. In order to send activation or deactivation, the VERIPOS Helpdesk will require the Unit Code and SAL code.

From the main menu select Unit Registration to open the registration window: 

From the main menu select Unit Registration to open the registration window

The user must supply the Unit Code displayed in this screen to VERIPOS Helpdesk. The  Service Code and Service Status is also displayed.

This Service Code determines what VERIPOS Services will be computed, this will change depending on which VERIPOS Services are requested from the Helpdesk.

The Service Status will display whether or not the unit is enabled or disabled.

Request an Enable or Disable Code

Requests for enable/disable codes should be made should be submitted by email to the VERIPOS Helpdesk at: veripos.helpdesk@veripos.com

Enable/disable requests may also be submitted by telephone to the VERIPOS Helpdesk at: +44 (0) 1224 965900.

VERIPOS provide a range of services. When requesting an enable code the user must specify which services are required. A list of services is provided on the Signal Notification form. The choice of services affects both pricing and system accuracy.

Note: Below is what Services are available to each receiver type:

Receiver Type Services
LD3-G1/LD3S-G1/LID3-G1/LID3S Standard
LD3-GG1/LD3S-GG1/LID3-GG1/LID3S-GG1 Standard, Standard²
LD3-G2/LD3S-G2/LID3-G2/LID3S-G2 Standard, Standard+, APEX, Ultra
LD3-GG2/LD3S-GG2/LID3-GG2/LID3S-GG2 Standard, Standard+, Standard², APEX, APEX², Ultra

Enable the LD3S

Once the VERIPOS Helpdesk receives the activation request (including the Unit Code, SAL and service requirements, they will send the activation over the air.

The Service Status”will change automatically when the activation is received. The ID LED on the front panel will turn on confirming that the LD3 is enabled for use.

Disable LD3S

The unit is disabled in the same way, by contacting VERIPOS Helpdesk.

Report the Unit Code and SAL to the VERIPOS Helpdesk. They will send a deactivation to your unit.

The ID LED on the front panel will turn off confirming that the unit is disabled.