For LD7 What is the expected latency from one PPS to the NMEA ZDA telegram? How do I change my LD7 IP address through USB? How do I check the GNSS receiver firmware version on my LD7? How do I check the IP address of my LD7? How do I configure my LD7 to use the Apex service? How do I Configure my PC to connect my LD7? How do I configure the LD7 as an RTK Base Station? How do I configure the LD7 as an RTK Rover? How do I remove satellites from my LD7 (Septentrio GNSS) for DP Trials? How do I set my LD7 to output 5Hz on com1 and com 2? How do I set my LD7 to output HRP message? I have changed my PPP service and my LD7 solution has become unstable, how do I resolve this? I have just changed beams and my station list is not fully populated why is this? LD7 Installation Manual LD7 Operations Manual LD7 Quick Guide LD7 USB Drivers
How do I check the GNSS receiver firmware version on my LD7?
The steps below detail how to check the GNSS card Firmware version of an LD7 unit.
- Launch the web browser interface via the LD7 IP address (default 192.168.0.126).
- Enter the unique LD7 5 digit User code, found on front of the LD7 unit, this will load the configuration options in the browser.
- Navigate to the GNSS configuration tab
- Locate the header information in the tab where it displays the GNSS firmware version.