AGRICULTURE
Note: Where available Quantum should be used for all LD8 configuration. This article will detail locating an LD8 IP address using either Quantum or the terminal.
From the Quantum main screen go to Settings. Within SETTINGS the LD8 IP adress can be found at the top left of the page:
Connect a serial cable from COM3 to a PC with a terminal application installed.
Set the IO Device as Serial, select correct PC port and set the baud rate to 115200 8 None 1.
Once connection has been established enter 'log ipconfiga'
The response should be similar to the below, displaying the IP address and subnet settings (preceded by ETHA, STATIC,) within quotation marks:
To change an IP address see FAQ How do I change my LD8 IP address?