Our Response to COVID-19 | Support and Response
AUTONOMY & POSITIONING DIVISION

Hexagon's Divisions

Explore Hexagon

Hexagon Agriculture

AGRICULTURE

Hexagon Agriculture
Positioning

AUTONOMY & POSITIONING

Geosystems

GEOSYSTEMS

Hexagon Geosystems
Manufacturing Intelligence

MANUFACTURING INTELLIGENCE

Mining

MINING

PPM

PPM

Geospatial

Safety, INFRASTRUCTURE & GEOSPATIAL

Positioning

XALT

Explore All

Explore Hexagon

Hexagon Agriculture

OUR STORY

SOLUTIONS

 

Hexagon_HomePage_Pod_3_Sustainability

SUSTAINABILITY

 

Learn More
  • HexagonPI_VERIPOS_RGB_STANDARD_LOGO
  • Products
    • Antennas
    • Anti-jam Antenna Systems (GAJT)
      • GAJT-710MS anti-jam antenna
      • GAJT-410MS anti-jam antenna
    • GNSS Receivers
    • Correction Services
    • Software
    • SPAN GNSS+INS Technology
      • IMU-ISA-100C
      • IMU-μIMU-IC
  • Applications
    • Seismic Exploration
    • Dynamic Positioning - Drilling
    • Dynamic Positioning - Marine
    • Marine Survey
    • Construction
  • Tech Talk
    • Introduction to GNSS Book
    • Velocity
      • Velocity 2021
        • Advanced GNSS+Inertial for marine survey and dynamic positioning
        • A save at sea
      • Velocity 2020
        • Charting the Course
      • Velocity 2019
        • Uncharted Waters
      • Velocity 2018
        • Realigned on Reliability
    • Your VERIPOS Advantage
  • Support
    • Technical Documents
      • Antennas and Cabling
        • Antenna and Coaxial Cable Installation Manual
        • GNSS Heading Antenna Installation Guide
        • GPS Antenna Installation - Quick Guide
        • Inmarsat B Signal Interface - Quick Guide
        • Spotbeam Antenna Installation - Asia Pac Quick Guide
        • Spotbeam Antenna Installation - EAME Quick Guide
        • Spotbeam Antenna Installation - GoM Quick Guide
      • LD5
        • LD5 and Quantum Interfacing Quick Guide
        • Interconexión de un LD5C y Quantum Guía Rápida
        • LD5 (A & B Variants) Operations Manual
        • LD5 (C Variant) Operations Manual
        • LD5 DP Bridge Card
        • LD5 Installation Manual
        • LD5 Introduction Video (A Variant)
      • LD6
        • LD6 and Quantum Interfacing Quick Guide
        • LD6 DP Bridge Card
        • LD6 Installation Manual
        • LD6 Introduction Video (Version 8 & 50)
        • LD6 Operations Manual (Version 101)
        • LD6 Operations Manual (Version 105)
        • LD6 Operations Manual (Version 8 & 50)
        • LD6 Quick Guide
        • Vídeo de introdução do LD6 em HD alta qualidade (Versões 8 e 50)
      • LD8
        • Interconexión de un LD8 y Quantum Guía Rápida
        • LD8 and Quantum Interfacing Quick Guide
        • LD8 Commands Quick Guide
        • LD8 FMEA Trial Guide (Using Quantum 6)
        • LD8 FMEA Trial Guide (using WebUI)
        • LD8 Installation Manual
        • LD8 Operations Manual
        • LD8 Set-up Quick Guide
      • LD900
        • Configurando el LD900 Guía Rápida
        • Interconexión de un LD900 y Quantum Guía Rápida
        • LD900 and INS Commissioning Guide
        • LD900 and Quantum Interfacing Quick Guide
        • LD900 Installation and Operations Manual
        • LD900 Set-Up Quick Guide
      • Quantum
        • Quantum User Manual
    • Firmware/Software
    • Legacy Products
      • LD2 - LD2S Equipment (EoL)
        • Configuring a Verify DP Heading input on PORT3
        • Configuring a Verify DP Heading input through USB
        • For LD2 What is the expected latency from one PPS to the ZDA telegram?
        • Guia rápido do LD2 da VERIPOS (LD2 Quick Guide - Brazilian Portuguese)
        • How can I change the IP address of my LD2(S) when using Verify-DP?
        • How can I determine what L-band firmware versions are installed on the LD2/LD2S?
        • How do I check the GLONASS option on my Topcon GNSS Receiver in an LD2 IMU?
        • How do I check the L-band reception status of my LD2/LD2S demodulator?
        • How do I check version number of my LD2?
        • How do I configure a Position Output on port P1 of my LD2/LD2S?
        • How do I configure my LD2 (Topcon GPS card) to output a ZDA and 1PPS string from Port 1 of the LD2?
        • How do I configure my LD2 to use the Apex service?
        • How do I manually select MF Stations on my LD2 IMU?
        • How do I Remove Standard+ Service in my LD2/LD2S?
        • How do I select MF or HF Auto Frequency on my LD2?
        • How do I upgrade the GLONASS option on my Topcon GNSS Receiver?
        • I have just changed beams and my station list is not fully populated why is this?
        • LD2 DP Bridge Card
        • LD2 Installation Manual
        • LD2 Operations Manual
        • LD2 Quick Guide
        • LD2 Setup - Configuring PPS & ZDA Output from Topcon GPS Card
        • Selecting An LD2 L-band Beam
        • What are the tracking capabilities of my LD2 and what services are available to my unit?
        • What data is available on the LD2 Ethernet port?
        • What do the status LED's on the front panel of the LD2 show?
        • What is demodulator Channel 16 used for and how I configure it?
        • What NMEA telegrams are available for output from the LD2/LD2S?
      • LD3 - LD3S Equipment
        • How do I configure my LD3S-GG2 to use the Apex service?
        • How do I enable/disable my LD3/LD3S?
        • How do I run the VERIPOS L-Band Control software to configure my LD3 or LD3S?
        • I have changed my PPP service and my LD3S solution has become unstable, how do I resolve this?
        • I have just changed beams and my station list is not fully populated why is this?
        • I need to configure my LD3/LD3S, how do I connect a computer?
        • LD3 Installation Manual
        • LD3 Operations Manual
        • What do the LED’s on the front of the LD3/LD3S unit indicate?
        • What is the difference between an LD3 and an LD3S?
        • What is “VERIPOS L-Band Control” software? Where can I get it and how do I install it?
      • LD4 Equipment (EoL)
        • Accessing an LD4 Signal Status using L-band Control
        • How do I change the PPP Calculation of the LD4?
        • I have changed my PPP service and my LD4 solution has become unstable, how do I resolve this?
        • I have just changed beams and my station list is not fully populated why is this?
        • What is the PPS voltage of my LD4?
      • LD7 Equipment
        • For LD7 What is the expected latency from one PPS to the NMEA ZDA telegram?
        • How do I change my LD7 IP address through USB?
        • How do I check the GNSS receiver firmware version on my LD7?
        • How do I check the IP address of my LD7?
        • How do I configure my LD7 to use the Apex service?
        • How do I Configure my PC to connect my LD7?
        • How do I configure the LD7 as an RTK Base Station?
        • How do I configure the LD7 as an RTK Rover?
        • How do I remove satellites from my LD7 (Septentrio GNSS) for DP Trials?
        • How do I set my LD7 to output 5Hz on com1 and com 2?
        • How do I set my LD7 to output HRP message?
        • I have changed my PPP service and my LD7 solution has become unstable, how do I resolve this?
        • I have just changed beams and my station list is not fully populated why is this?
        • LD7 Installation Manual
        • LD7 Operations Manual
        • LD7 Quick Guide
        • LD7 USB Drivers
      • Orion
        • Manual do Usuário Orion (Versão 2.0.2.74)
        • Orion User Manual
        • Orion User Manual (Only for LD6 Version 8.2.03 & below)
      • Verichart
        • VeriChart User Manual
      • Verify-DP Software (EoL)
        • How can I change the IP address of my LD2(S) when using Verify-DP?
        • How I check an LD2 CF card build using Verify DP?
        • Verify-DP Operations Manual
      • Verify-DPx Software (EoL)
        • How do I enter a license code into my DPX unit?
        • I am using Verify-DPx. How do I enable/disable my LD3(S)?
        • Verify-DPx Commissioning Guide
        • Verify-DPx Installation Manual
        • Verify-DPx Operations Manual
      • Verify-QC Software (EoL)
        • A critical operation is planned for later today. What preparations can I make within Verify-QC?
        • After changing the L-band beam my RTCM station list is not fully populated, why is this?
        • Does Verify-QC configure all my LD2/LD2S settings or are some manual entries required?
        • How can I obtain a manual for Verify-QC v1.20?
        • How do I add non-VERIPOS RTCM stations to the Verify-QC software?
        • How do I archive data in Verify-QC?
        • How do I check the version number of my Verify QC software?
        • How do I configure an NTRIP RTCM input in Verify QC?
        • How do I configure Verify QC to compute an Apex (Apex2) solution
        • How do I configure Verify QC to compute an Ultra or Ultra2 solution?
        • How do I extend the duration of or upgrade my Verify-QC dongle?
        • How do I log RINEX data using the Verify-QC software?
        • How do I setup Apex as backup within Verify QC?
        • How do I upgrade my verify QC?
        • How to Import Verify QC Config Files from a USB to an LD6
        • If I have too many windows open in Verify-QC, could this cause my computer to crash?
        • I have rebooted my LD2, connected to Verify QC using the Ethernet Port and GNSS Rx in Calculation Status has turned red and stayed red. How do I get it green again?
        • Tides - Can I change between Ultra and Apex?
        • Tides - Can I use the Tides information in real-time?
        • Tides - (How) does the Tides calculation compensate for Heave, Pitch and Roll?
        • Tides - How do I configure and View Tides in Verify QC?
        • Tides - How do I convert from MSS Tides to LAT?
        • Tides - How do I know that MSS Tide and Geoid Tide give representative results?
        • Tides - How do I know that the Tides calculation is giving continuous results?
        • Tides-If I restart QC does Tides restart?
        • Tides - We are leaving the work area to make a port call, should I reset Tides?
        • Tides - What Antenna Height should be measured and what accuracy is required? Is this value fixed for the duration of a survey or should it be updated?
        • Tides - What is the vertical reference for the VERIPOS Tides estimates?
        • Tides-When will tides reset?
        • Tides - Where can I find the Tides logging files?
        • Verify-QC for LD6 Version User Manual
        • Verify-QC v1.20 User Manual
        • We have moved to a new area. Why am I not receiving corrections in Verify-QC?
        • What are the new features of Verify-QC v1.20?
        • What are the recommendations concerning Ultra Backup Positions in Verify-QC?
        • What Geoid model is used within the Verify-QC software?
        • What GNSS receivers does the Verify-QC software support?
        • What is the current release verison of the Verify-QC software and where can I get a copy?
        • What is the minimum specification for a PC to run Verify-QC? Is Windows Vista or Windows 7 supported?
        • What is the purpose of the Tides function in Verify-QC?
        • What is the Vio application included with Verify-QC and how can I use it?
        • When I try to start Verify-QC, I receive a warning message about the dongle. What can I do?
        • Why am I not receiving all the expected reference stations in Verify-QC?
        • Why can’t Verify-QC compute an Ultra Position?
        • Why is “Config” missing from my main menu in Verify-QC?
        • Why is one section of the RINEX logging menu of Verify QC greyed out?
    • FAQs
      • Antenna Installation
        • How do I install my spotbeam antenna for use in the Asia Pacific region ?
        • How do I install my spotbeam antenna for use in the EAME region?
        • How do I install my spotbeam antenna for use in the Gulf of Mexico region?
        • What are the considerations with regards to L-band and GNSS reception when working at high latitudes?
        • What are the Phase Centre values of the V460 antenna?
        • What are the Phase Centre values of the V560 antenna?
        • What tracking dish systems can I use and what Beams will they track?
        • When mobilising an antenna what distance is to be from other antenna?
      • Contacts & Support
        • How can I check any update on my support queries?
        • How do I contact the VERIPOS Helpdesk if I have a problem?
        • I need support – what information should I supply in my initial communication?
        • Where is my nearest VERIPOS office?
        • Why should I "Submit a Ticket" from the Web site rather than phoning the Helpdesk?
      • Coverage Charts
        • What is the latest version of Verichart Station configuration file?
        • What VERIPOS Reference Stations are available in the African region?
        • What VERIPOS Reference Stations are available in the Asia Pacific region?
        • What VERIPOS Reference Stations are available in the North American region?
        • What VERIPOS Reference Stations are available in the North West European region?
        • What VERIPOS Reference Stations are available in the South American region?
        • Where can I get a chart showing the footprints of the geostationary satellites that broadcast the VERIPOS corrections?
        • Which beams are available for use in the Africa Region?
        • Which beams are available for use in the Americas Region?
        • Which beams are available for use in the Europe and Middle East Region?
        • Which beams are available for use in the FarEast Region?
      • General Information
        • How can I fault find VERIPOS NTRIP?
        • How does GNSS work?
        • I have received a NANU notifying me about satellite maintenance. What should I do?
        • What geodetic reference frame do VERIPOS services use?
        • What is GNSS?
        • What is NMEA?
        • What is RTCM?
        • What is the difference between terms dual beam, dual constellation and dual frequency?
        • Wiring diagram for the DG14/16 DB-25 serial connector
      • Glossary
        • Almanac
        • Antispoofing (AS)
        • Bandwidth
        • Bit
        • Carrier
        • Carrier Phase
        • Carrier-to-Noise Power Density (C/N0)
        • Channel
        • Chip
        • Coarse Acquisition (C/A)-Code
        • Cold Start
        • Control Segment
        • Course over the Ground
        • Cycle Slip
        • Demodulation
        • Differential GPS (DGPS)
        • Dilution of Precision (DOP)
        • Distance Root Mean Square (DRMS)
        • Electromagnetic Spectrum
        • En Route
        • Ephemeris
        • Epoch
        • Error Budget
        • Fix
        • Frequency
        • Frequency Modulation
        • Geodesy
        • Geodetic Datum
        • Geoid
        • Geometric Dilution of Precision (GDOP)
        • Geostationary Satellites
        • GLONASS
        • GNSS
        • GPS (System) Time
        • GPS Week
        • Height Aiding
        • Horizontal Dilution of Precision (HDOP)
        • Inmarsat
        • Interference
        • Ionosphere
        • Keplerian Elements
        • Kilohertz
        • Kinematic
        • L1 Frequency Band
        • L2 Frequency Band
        • Latitude
        • L-band
        • Line of Position (LOP)
        • Longitude
        • Megahertz (MHz)
        • Modulation
        • Multipath
        • Nautical Mile
        • Navigation Message
        • NMEA 0183
        • Noise
        • Notice Advisory to GLONASS Users (NAGU)
        • Notice Advisory to NAVSTAR Users (NANU)
        • Orthometric Height
        • Oscillator
        • Parity
        • Precision (P)-Code
        • Pseudorandom Noise (PRN) Code
        • Pseudorange
        • Quadrifilar Helix
        • Ranging
        • Receiver Autonomous Integrity Monitoring (RAIM)
        • RINEX
        • RTCM SC-104
        • Selective Availability (SA)
        • Signal to Noise Ratio (SNR)
        • Space Segment
        • Spatial Decorrelation
        • Spoofing
        • Spread-Spectrum
        • Temporal Decorrelation
        • Tropospheric Delay
        • Universal Time Coordinated (UTC)
        • UT1
        • Warm Start
        • World Geodetic System 1984 (WGS 84)
        • Y-Code
        • Z-Count
      • LD5 Equipment
        • How do I change the cut off angle from my LD5-B or LD5-C for DP Trials?
        • How do I check the IP address of my LD5?
        • How do I configure an LD5 to receive RTK corrections?
        • How do I configure LD5 (A & B Variants) COM ports & Ethernet output?
        • How do I configure LD5 (C Variant) COM ports & Ethernet output?
        • How do I configure LD5 NMEA message output?
        • How do I configure my LD5 to use the Apex service?
        • How do I enable and output heading from my LD5-C?
        • How do I enable an LD5 for a heading?
        • How do I extract LD5 internal data?
        • How do I factory reset my LD5 Unit?
        • How do I manually enter an L-band satellite frequency on my LD5?
        • How do I remove satellites from my LD5-A for DP Trials?
        • How do I set up cross corrections on an LD5 unit?
        • How do I tell which LD5 version/variant I have?
        • How do you set up and log NMEA data from an LD5 unit?
        • I have just changed beams and my station list is not fully populated- Why is this?
        • I wish to enable External/MF corrections on my LD5-A for use in the position solution. Why is the 3rd Party menu item greyed out in the Routing menu?
        • What are the different LD5 operating modes?
        • What are the serial pin-outs of the LD5?
        • What are the tracking capabilities of the LD5 and what services are available?
        • What direction is the heading on my LD5?
        • What is the expected latency from one PPS to the NMEA ZDA telegram on the LD5?
      • LD6 Equipment
        • How can I interface RTCM data from two LD6 units to Verify QC using a single LAN connection (Dual beam corrections)?
        • How do I archive data on an LD6?
        • How do I change a beam on an LD6?
        • How do I change the PPP solution when my LD6 is enabled for both Apex and Ultra services?
        • How do I check the GNSS tracking capabilities of my LD6 version 8 or 50?
        • How do I check the IP address of my LD6?
        • How do I check which version of LD6 I have?
        • How do I configure an LD6 to receive RTK corrections?
        • How do I configure LD6 TRINAV Output?
        • How do I configure my LD6 to use the Apex service?
        • How do I configure NMEA Sentences on an LD6 versions 8 or 50?
        • How do I configure NMEA sentences on LD6 versions 101 and 105?
        • How do I correctly shut down a LD6?
        • How do I enable and output a heading from an LD6?
        • How do I enable SBAS on my LD6 IMU?
        • How do I factory reset my LD6 unit?
        • How do I implement a basic LAN interface between an LD6 and my Verify QC computer? (v1.11 or later)
        • How do I interface my antennas to the LD6?
        • How do I manually enter an L-band frequency on the LD6?
        • How do I remove satellites from my LD6 version 8 or 50?
        • How do I set up LD6 Outputs for VQC?
        • How do you load a Verify QC config onto the LD6 while in QC mode?
        • I have just changed beams and my station list is not fully populated- Why is this?
        • What are the serial pin-outs of the LD6?
        • What are the tracking capabilities of my LD6 and what services are available to my unit?
        • What data is available on the LD6 Ethernet ports?
        • What direction is the heading on my LD6?
        • What files should I send for data analysis from a LD6 while running quantum on board?
        • What is the best way to interface Verify QC to my LD6 units?
        • What is the expected latency from one PPS to the NMEA ZDA telegram on the LD6?
        • What is the PPS voltage and pulse width of my LD6?
        • What version of GNSS card is installed in my LD6?
      • LD8 Equipment
        • Can I operate an LD8 with both the WebUI and Quantum?
        • How do I access my LD8 logs?
        • How do I change my LD8 IP address?
        • How do I change the PPP Mode of the LD8?
        • How do I check if my LD8 (with WebUI) is enabled or disabled?
        • How do I check (or) change my LD8 L-band beam?
        • How do I configure an LD8 to output VERIPOS RTCM?
        • How do I configure my PC to connect to a LD8?
        • How do I configure RTK Correction input for an LD8?
        • How do I download all LD8 data logs?
        • How do I find my LD8 IP address?
        • How do I log into my LD8?
        • What direction is the heading on my LD8?
        • What is the PPS voltage and pulse width of my LD8?
        • What ports are available for LD8 TCP/IP connections?
        • Where do I find my LD8 unit ID?
      • LD900 Equipment
        • How do I access my LD900 archive logs?
        • How do I activate, configure and enable heading on an LD900?
        • How do I activate my LD900 for VERIPOS services?
        • How do I change my LD900 IP address?
        • How do I change the PPP calculation of my LD900?
        • How do I check or change my LD900 L-Band beam?
        • How do I configure my PC to connect to an LD900?
        • How do I convert LD900 logged data into RINEX format?
        • How do I enable and configure my LD900 to receive VERIPOS Corrections via NTRIP?
        • How do I find my LD900 IP address?
        • How do I tell which model of LD900 I have?
        • How do you apply an Auth Code to an LD900?
        • What direction is the heading on my LD900?
        • What is HDR Mode on the LD900?
        • What is the Auto L-band beam?
        • Why can I not connect to the LD900 TCP/IP ports?
      • Product Specification Sheets
        • VERIPOS Tide Product Specification
      • Quantum
        • How can I tell when my rented Quantum licence will expire?
        • How do I apply a new license in Quantum?
        • How do I tell the activated services on my receiver and the Quantum's licence type from the Quantum display?
        • What do the different shaped icons on the Satellite polar plot of Quantum Display represent?
        • What is Quantum?
        • Where can I find the Quantum version number?
        • Why does Quantum display 'Uncorrected' if APEX or ULTRA is stable?
        • Why is Quantum software not showing all GNSS constellations being used with Apex5?
      • Verichart Software
        • How do I create a coverage chart using VeriChart?
        • How do I install the latest Verichart Station configuration file?
        • What is the latest version of Verichart Station configuration file?
        • Where can I get the latest version of the VeriChart software?
      • VERIPOS Service's
        • How do I Enable/Disable my VERIPOS hardware?
        • I have just changed beams and my station list is not fully populated why is this?
        • What are the Advantages of Each VERIPOS Service?
        • What are the benefits of the VERIPOS GPS + GLONASS Services?
        • What are the ID's of the VERIPOS PPP services (ULTRA, ULTRA2, APEX, APEX2 and APEX5)?
        • What are the VERIPOS station ID's and which satellite beams are they available on?
        • What is the difference between Apex and Ultra corrections?
        • What is the difference between terms dual beam, dual constellation and dual frequency?
        • What RTCM messages are used by the VERIPOS services and what latencies are acceptable?
        • What satellites are the VERIPOS services available on and what are the beam frequencies and data rates?
        • What VERIPOS beams are available for system's interfaced to Fleet and Fleet Broadband Inmarsat system?
  • About Us
    • Vision, Mission & Values
    • Sustainability
    • Coverage
      • GNSS Reference Station Details
    • Training
    • VERIPOS Network Control Centres
    • Commercial
    • Certifications
    • Press Releases
    • Careers
  • Careers
  • Contact Us
    • VERIPOS Offices and Distributors
    • Support
  • Products
    • Antennas
    • Anti-jam Antenna Systems (GAJT)
      • GAJT-710MS anti-jam antenna
      • GAJT-410MS anti-jam antenna
    • GNSS Receivers
    • Correction Services
    • Software
    • SPAN GNSS+INS Technology
      • IMU-ISA-100C
      • IMU-μIMU-IC
  • Applications
    • Seismic Exploration
    • Dynamic Positioning - Drilling
    • Dynamic Positioning - Marine
    • Marine Survey
    • Construction
  • Tech Talk
    • Introduction to GNSS Book
    • Velocity
      • Velocity 2021
        • Advanced GNSS+Inertial for marine survey and dynamic positioning
        • A save at sea
      • Velocity 2020
        • Charting the Course
      • Velocity 2019
        • Uncharted Waters
      • Velocity 2018
        • Realigned on Reliability
    • Your VERIPOS Advantage
  • Support
    • Technical Documents
      • Antennas and Cabling
        • Antenna and Coaxial Cable Installation Manual
        • GNSS Heading Antenna Installation Guide
        • GPS Antenna Installation - Quick Guide
        • Inmarsat B Signal Interface - Quick Guide
        • Spotbeam Antenna Installation - Asia Pac Quick Guide
        • Spotbeam Antenna Installation - EAME Quick Guide
        • Spotbeam Antenna Installation - GoM Quick Guide
      • LD5
        • LD5 and Quantum Interfacing Quick Guide
        • Interconexión de un LD5C y Quantum Guía Rápida
        • LD5 (A & B Variants) Operations Manual
        • LD5 (C Variant) Operations Manual
        • LD5 DP Bridge Card
        • LD5 Installation Manual
        • LD5 Introduction Video (A Variant)
      • LD6
        • LD6 and Quantum Interfacing Quick Guide
        • LD6 DP Bridge Card
        • LD6 Installation Manual
        • LD6 Introduction Video (Version 8 & 50)
        • LD6 Operations Manual (Version 101)
        • LD6 Operations Manual (Version 105)
        • LD6 Operations Manual (Version 8 & 50)
        • LD6 Quick Guide
        • Vídeo de introdução do LD6 em HD alta qualidade (Versões 8 e 50)
      • LD8
        • Interconexión de un LD8 y Quantum Guía Rápida
        • LD8 and Quantum Interfacing Quick Guide
        • LD8 Commands Quick Guide
        • LD8 FMEA Trial Guide (Using Quantum 6)
        • LD8 FMEA Trial Guide (using WebUI)
        • LD8 Installation Manual
        • LD8 Operations Manual
        • LD8 Set-up Quick Guide
      • LD900
        • Configurando el LD900 Guía Rápida
        • Interconexión de un LD900 y Quantum Guía Rápida
        • LD900 and INS Commissioning Guide
        • LD900 and Quantum Interfacing Quick Guide
        • LD900 Installation and Operations Manual
        • LD900 Set-Up Quick Guide
      • Quantum
        • Quantum User Manual
    • Firmware/Software
    • Legacy Products
      • LD2 - LD2S Equipment (EoL)
        • Configuring a Verify DP Heading input on PORT3
        • Configuring a Verify DP Heading input through USB
        • For LD2 What is the expected latency from one PPS to the ZDA telegram?
        • Guia rápido do LD2 da VERIPOS (LD2 Quick Guide - Brazilian Portuguese)
        • How can I change the IP address of my LD2(S) when using Verify-DP?
        • How can I determine what L-band firmware versions are installed on the LD2/LD2S?
        • How do I check the GLONASS option on my Topcon GNSS Receiver in an LD2 IMU?
        • How do I check the L-band reception status of my LD2/LD2S demodulator?
        • How do I check version number of my LD2?
        • How do I configure a Position Output on port P1 of my LD2/LD2S?
        • How do I configure my LD2 (Topcon GPS card) to output a ZDA and 1PPS string from Port 1 of the LD2?
        • How do I configure my LD2 to use the Apex service?
        • How do I manually select MF Stations on my LD2 IMU?
        • How do I Remove Standard+ Service in my LD2/LD2S?
        • How do I select MF or HF Auto Frequency on my LD2?
        • How do I upgrade the GLONASS option on my Topcon GNSS Receiver?
        • I have just changed beams and my station list is not fully populated why is this?
        • LD2 DP Bridge Card
        • LD2 Installation Manual
        • LD2 Operations Manual
        • LD2 Quick Guide
        • LD2 Setup - Configuring PPS & ZDA Output from Topcon GPS Card
        • Selecting An LD2 L-band Beam
        • What are the tracking capabilities of my LD2 and what services are available to my unit?
        • What data is available on the LD2 Ethernet port?
        • What do the status LED's on the front panel of the LD2 show?
        • What is demodulator Channel 16 used for and how I configure it?
        • What NMEA telegrams are available for output from the LD2/LD2S?
      • LD3 - LD3S Equipment
        • How do I configure my LD3S-GG2 to use the Apex service?
        • How do I enable/disable my LD3/LD3S?
        • How do I run the VERIPOS L-Band Control software to configure my LD3 or LD3S?
        • I have changed my PPP service and my LD3S solution has become unstable, how do I resolve this?
        • I have just changed beams and my station list is not fully populated why is this?
        • I need to configure my LD3/LD3S, how do I connect a computer?
        • LD3 Installation Manual
        • LD3 Operations Manual
        • What do the LED’s on the front of the LD3/LD3S unit indicate?
        • What is the difference between an LD3 and an LD3S?
        • What is “VERIPOS L-Band Control” software? Where can I get it and how do I install it?
      • LD4 Equipment (EoL)
        • Accessing an LD4 Signal Status using L-band Control
        • How do I change the PPP Calculation of the LD4?
        • I have changed my PPP service and my LD4 solution has become unstable, how do I resolve this?
        • I have just changed beams and my station list is not fully populated why is this?
        • What is the PPS voltage of my LD4?
      • LD7 Equipment
        • For LD7 What is the expected latency from one PPS to the NMEA ZDA telegram?
        • How do I change my LD7 IP address through USB?
        • How do I check the GNSS receiver firmware version on my LD7?
        • How do I check the IP address of my LD7?
        • How do I configure my LD7 to use the Apex service?
        • How do I Configure my PC to connect my LD7?
        • How do I configure the LD7 as an RTK Base Station?
        • How do I configure the LD7 as an RTK Rover?
        • How do I remove satellites from my LD7 (Septentrio GNSS) for DP Trials?
        • How do I set my LD7 to output 5Hz on com1 and com 2?
        • How do I set my LD7 to output HRP message?
        • I have changed my PPP service and my LD7 solution has become unstable, how do I resolve this?
        • I have just changed beams and my station list is not fully populated why is this?
        • LD7 Installation Manual
        • LD7 Operations Manual
        • LD7 Quick Guide
        • LD7 USB Drivers
      • Orion
        • Manual do Usuário Orion (Versão 2.0.2.74)
        • Orion User Manual
        • Orion User Manual (Only for LD6 Version 8.2.03 & below)
      • Verichart
        • VeriChart User Manual
      • Verify-DP Software (EoL)
        • How can I change the IP address of my LD2(S) when using Verify-DP?
        • How I check an LD2 CF card build using Verify DP?
        • Verify-DP Operations Manual
      • Verify-DPx Software (EoL)
        • How do I enter a license code into my DPX unit?
        • I am using Verify-DPx. How do I enable/disable my LD3(S)?
        • Verify-DPx Commissioning Guide
        • Verify-DPx Installation Manual
        • Verify-DPx Operations Manual
      • Verify-QC Software (EoL)
        • A critical operation is planned for later today. What preparations can I make within Verify-QC?
        • After changing the L-band beam my RTCM station list is not fully populated, why is this?
        • Does Verify-QC configure all my LD2/LD2S settings or are some manual entries required?
        • How can I obtain a manual for Verify-QC v1.20?
        • How do I add non-VERIPOS RTCM stations to the Verify-QC software?
        • How do I archive data in Verify-QC?
        • How do I check the version number of my Verify QC software?
        • How do I configure an NTRIP RTCM input in Verify QC?
        • How do I configure Verify QC to compute an Apex (Apex2) solution
        • How do I configure Verify QC to compute an Ultra or Ultra2 solution?
        • How do I extend the duration of or upgrade my Verify-QC dongle?
        • How do I log RINEX data using the Verify-QC software?
        • How do I setup Apex as backup within Verify QC?
        • How do I upgrade my verify QC?
        • How to Import Verify QC Config Files from a USB to an LD6
        • If I have too many windows open in Verify-QC, could this cause my computer to crash?
        • I have rebooted my LD2, connected to Verify QC using the Ethernet Port and GNSS Rx in Calculation Status has turned red and stayed red. How do I get it green again?
        • Tides - Can I change between Ultra and Apex?
        • Tides - Can I use the Tides information in real-time?
        • Tides - (How) does the Tides calculation compensate for Heave, Pitch and Roll?
        • Tides - How do I configure and View Tides in Verify QC?
        • Tides - How do I convert from MSS Tides to LAT?
        • Tides - How do I know that MSS Tide and Geoid Tide give representative results?
        • Tides - How do I know that the Tides calculation is giving continuous results?
        • Tides-If I restart QC does Tides restart?
        • Tides - We are leaving the work area to make a port call, should I reset Tides?
        • Tides - What Antenna Height should be measured and what accuracy is required? Is this value fixed for the duration of a survey or should it be updated?
        • Tides - What is the vertical reference for the VERIPOS Tides estimates?
        • Tides-When will tides reset?
        • Tides - Where can I find the Tides logging files?
        • Verify-QC for LD6 Version User Manual
        • Verify-QC v1.20 User Manual
        • We have moved to a new area. Why am I not receiving corrections in Verify-QC?
        • What are the new features of Verify-QC v1.20?
        • What are the recommendations concerning Ultra Backup Positions in Verify-QC?
        • What Geoid model is used within the Verify-QC software?
        • What GNSS receivers does the Verify-QC software support?
        • What is the current release verison of the Verify-QC software and where can I get a copy?
        • What is the minimum specification for a PC to run Verify-QC? Is Windows Vista or Windows 7 supported?
        • What is the purpose of the Tides function in Verify-QC?
        • What is the Vio application included with Verify-QC and how can I use it?
        • When I try to start Verify-QC, I receive a warning message about the dongle. What can I do?
        • Why am I not receiving all the expected reference stations in Verify-QC?
        • Why can’t Verify-QC compute an Ultra Position?
        • Why is “Config” missing from my main menu in Verify-QC?
        • Why is one section of the RINEX logging menu of Verify QC greyed out?
    • FAQs
      • Antenna Installation
        • How do I install my spotbeam antenna for use in the Asia Pacific region ?
        • How do I install my spotbeam antenna for use in the EAME region?
        • How do I install my spotbeam antenna for use in the Gulf of Mexico region?
        • What are the considerations with regards to L-band and GNSS reception when working at high latitudes?
        • What are the Phase Centre values of the V460 antenna?
        • What are the Phase Centre values of the V560 antenna?
        • What tracking dish systems can I use and what Beams will they track?
        • When mobilising an antenna what distance is to be from other antenna?
      • Contacts & Support
        • How can I check any update on my support queries?
        • How do I contact the VERIPOS Helpdesk if I have a problem?
        • I need support – what information should I supply in my initial communication?
        • Where is my nearest VERIPOS office?
        • Why should I "Submit a Ticket" from the Web site rather than phoning the Helpdesk?
      • Coverage Charts
        • What is the latest version of Verichart Station configuration file?
        • What VERIPOS Reference Stations are available in the African region?
        • What VERIPOS Reference Stations are available in the Asia Pacific region?
        • What VERIPOS Reference Stations are available in the North American region?
        • What VERIPOS Reference Stations are available in the North West European region?
        • What VERIPOS Reference Stations are available in the South American region?
        • Where can I get a chart showing the footprints of the geostationary satellites that broadcast the VERIPOS corrections?
        • Which beams are available for use in the Africa Region?
        • Which beams are available for use in the Americas Region?
        • Which beams are available for use in the Europe and Middle East Region?
        • Which beams are available for use in the FarEast Region?
      • General Information
        • How can I fault find VERIPOS NTRIP?
        • How does GNSS work?
        • I have received a NANU notifying me about satellite maintenance. What should I do?
        • What geodetic reference frame do VERIPOS services use?
        • What is GNSS?
        • What is NMEA?
        • What is RTCM?
        • What is the difference between terms dual beam, dual constellation and dual frequency?
        • Wiring diagram for the DG14/16 DB-25 serial connector
      • Glossary
        • Almanac
        • Antispoofing (AS)
        • Bandwidth
        • Bit
        • Carrier
        • Carrier Phase
        • Carrier-to-Noise Power Density (C/N0)
        • Channel
        • Chip
        • Coarse Acquisition (C/A)-Code
        • Cold Start
        • Control Segment
        • Course over the Ground
        • Cycle Slip
        • Demodulation
        • Differential GPS (DGPS)
        • Dilution of Precision (DOP)
        • Distance Root Mean Square (DRMS)
        • Electromagnetic Spectrum
        • En Route
        • Ephemeris
        • Epoch
        • Error Budget
        • Fix
        • Frequency
        • Frequency Modulation
        • Geodesy
        • Geodetic Datum
        • Geoid
        • Geometric Dilution of Precision (GDOP)
        • Geostationary Satellites
        • GLONASS
        • GNSS
        • GPS (System) Time
        • GPS Week
        • Height Aiding
        • Horizontal Dilution of Precision (HDOP)
        • Inmarsat
        • Interference
        • Ionosphere
        • Keplerian Elements
        • Kilohertz
        • Kinematic
        • L1 Frequency Band
        • L2 Frequency Band
        • Latitude
        • L-band
        • Line of Position (LOP)
        • Longitude
        • Megahertz (MHz)
        • Modulation
        • Multipath
        • Nautical Mile
        • Navigation Message
        • NMEA 0183
        • Noise
        • Notice Advisory to GLONASS Users (NAGU)
        • Notice Advisory to NAVSTAR Users (NANU)
        • Orthometric Height
        • Oscillator
        • Parity
        • Precision (P)-Code
        • Pseudorandom Noise (PRN) Code
        • Pseudorange
        • Quadrifilar Helix
        • Ranging
        • Receiver Autonomous Integrity Monitoring (RAIM)
        • RINEX
        • RTCM SC-104
        • Selective Availability (SA)
        • Signal to Noise Ratio (SNR)
        • Space Segment
        • Spatial Decorrelation
        • Spoofing
        • Spread-Spectrum
        • Temporal Decorrelation
        • Tropospheric Delay
        • Universal Time Coordinated (UTC)
        • UT1
        • Warm Start
        • World Geodetic System 1984 (WGS 84)
        • Y-Code
        • Z-Count
      • LD5 Equipment
        • How do I change the cut off angle from my LD5-B or LD5-C for DP Trials?
        • How do I check the IP address of my LD5?
        • How do I configure an LD5 to receive RTK corrections?
        • How do I configure LD5 (A & B Variants) COM ports & Ethernet output?
        • How do I configure LD5 (C Variant) COM ports & Ethernet output?
        • How do I configure LD5 NMEA message output?
        • How do I configure my LD5 to use the Apex service?
        • How do I enable and output heading from my LD5-C?
        • How do I enable an LD5 for a heading?
        • How do I extract LD5 internal data?
        • How do I factory reset my LD5 Unit?
        • How do I manually enter an L-band satellite frequency on my LD5?
        • How do I remove satellites from my LD5-A for DP Trials?
        • How do I set up cross corrections on an LD5 unit?
        • How do I tell which LD5 version/variant I have?
        • How do you set up and log NMEA data from an LD5 unit?
        • I have just changed beams and my station list is not fully populated- Why is this?
        • I wish to enable External/MF corrections on my LD5-A for use in the position solution. Why is the 3rd Party menu item greyed out in the Routing menu?
        • What are the different LD5 operating modes?
        • What are the serial pin-outs of the LD5?
        • What are the tracking capabilities of the LD5 and what services are available?
        • What direction is the heading on my LD5?
        • What is the expected latency from one PPS to the NMEA ZDA telegram on the LD5?
      • LD6 Equipment
        • How can I interface RTCM data from two LD6 units to Verify QC using a single LAN connection (Dual beam corrections)?
        • How do I archive data on an LD6?
        • How do I change a beam on an LD6?
        • How do I change the PPP solution when my LD6 is enabled for both Apex and Ultra services?
        • How do I check the GNSS tracking capabilities of my LD6 version 8 or 50?
        • How do I check the IP address of my LD6?
        • How do I check which version of LD6 I have?
        • How do I configure an LD6 to receive RTK corrections?
        • How do I configure LD6 TRINAV Output?
        • How do I configure my LD6 to use the Apex service?
        • How do I configure NMEA Sentences on an LD6 versions 8 or 50?
        • How do I configure NMEA sentences on LD6 versions 101 and 105?
        • How do I correctly shut down a LD6?
        • How do I enable and output a heading from an LD6?
        • How do I enable SBAS on my LD6 IMU?
        • How do I factory reset my LD6 unit?
        • How do I implement a basic LAN interface between an LD6 and my Verify QC computer? (v1.11 or later)
        • How do I interface my antennas to the LD6?
        • How do I manually enter an L-band frequency on the LD6?
        • How do I remove satellites from my LD6 version 8 or 50?
        • How do I set up LD6 Outputs for VQC?
        • How do you load a Verify QC config onto the LD6 while in QC mode?
        • I have just changed beams and my station list is not fully populated- Why is this?
        • What are the serial pin-outs of the LD6?
        • What are the tracking capabilities of my LD6 and what services are available to my unit?
        • What data is available on the LD6 Ethernet ports?
        • What direction is the heading on my LD6?
        • What files should I send for data analysis from a LD6 while running quantum on board?
        • What is the best way to interface Verify QC to my LD6 units?
        • What is the expected latency from one PPS to the NMEA ZDA telegram on the LD6?
        • What is the PPS voltage and pulse width of my LD6?
        • What version of GNSS card is installed in my LD6?
      • LD8 Equipment
        • Can I operate an LD8 with both the WebUI and Quantum?
        • How do I access my LD8 logs?
        • How do I change my LD8 IP address?
        • How do I change the PPP Mode of the LD8?
        • How do I check if my LD8 (with WebUI) is enabled or disabled?
        • How do I check (or) change my LD8 L-band beam?
        • How do I configure an LD8 to output VERIPOS RTCM?
        • How do I configure my PC to connect to a LD8?
        • How do I configure RTK Correction input for an LD8?
        • How do I download all LD8 data logs?
        • How do I find my LD8 IP address?
        • How do I log into my LD8?
        • What direction is the heading on my LD8?
        • What is the PPS voltage and pulse width of my LD8?
        • What ports are available for LD8 TCP/IP connections?
        • Where do I find my LD8 unit ID?
      • LD900 Equipment
        • How do I access my LD900 archive logs?
        • How do I activate, configure and enable heading on an LD900?
        • How do I activate my LD900 for VERIPOS services?
        • How do I change my LD900 IP address?
        • How do I change the PPP calculation of my LD900?
        • How do I check or change my LD900 L-Band beam?
        • How do I configure my PC to connect to an LD900?
        • How do I convert LD900 logged data into RINEX format?
        • How do I enable and configure my LD900 to receive VERIPOS Corrections via NTRIP?
        • How do I find my LD900 IP address?
        • How do I tell which model of LD900 I have?
        • How do you apply an Auth Code to an LD900?
        • What direction is the heading on my LD900?
        • What is HDR Mode on the LD900?
        • What is the Auto L-band beam?
        • Why can I not connect to the LD900 TCP/IP ports?
      • Product Specification Sheets
        • VERIPOS Tide Product Specification
      • Quantum
        • How can I tell when my rented Quantum licence will expire?
        • How do I apply a new license in Quantum?
        • How do I tell the activated services on my receiver and the Quantum's licence type from the Quantum display?
        • What do the different shaped icons on the Satellite polar plot of Quantum Display represent?
        • What is Quantum?
        • Where can I find the Quantum version number?
        • Why does Quantum display 'Uncorrected' if APEX or ULTRA is stable?
        • Why is Quantum software not showing all GNSS constellations being used with Apex5?
      • Verichart Software
        • How do I create a coverage chart using VeriChart?
        • How do I install the latest Verichart Station configuration file?
        • What is the latest version of Verichart Station configuration file?
        • Where can I get the latest version of the VeriChart software?
      • VERIPOS Service's
        • How do I Enable/Disable my VERIPOS hardware?
        • I have just changed beams and my station list is not fully populated why is this?
        • What are the Advantages of Each VERIPOS Service?
        • What are the benefits of the VERIPOS GPS + GLONASS Services?
        • What are the ID's of the VERIPOS PPP services (ULTRA, ULTRA2, APEX, APEX2 and APEX5)?
        • What are the VERIPOS station ID's and which satellite beams are they available on?
        • What is the difference between Apex and Ultra corrections?
        • What is the difference between terms dual beam, dual constellation and dual frequency?
        • What RTCM messages are used by the VERIPOS services and what latencies are acceptable?
        • What satellites are the VERIPOS services available on and what are the beam frequencies and data rates?
        • What VERIPOS beams are available for system's interfaced to Fleet and Fleet Broadband Inmarsat system?
  • About Us
    • Vision, Mission & Values
    • Sustainability
    • Coverage
      • GNSS Reference Station Details
    • Training
    • VERIPOS Network Control Centres
    • Commercial
    • Certifications
    • Press Releases
    • Careers
  • Careers
  • Contact Us
    • VERIPOS Offices and Distributors
    • Support
Farm implement in a field

Our commitment to sustainability

We're working on creating an autonomous and sustainable future.
Learn more
Banner images for SPAN for DP

SPAN GNSS+INS for dynamic positioning

Hexagon | VERIPOS is proud to expand its proven inertial solution technology from NovAtel

Learn more
The new GAJT-410MS from Hexagon | VERIPOS for anti-jam protection at sea in low-SWaP vessels

New low-SWaP anti-jam technology

Assured positioning, navigation and timing for space-constrained DP platforms and unmanned vessels.

Learn more

Velocity Magazine 2021

The annual journal of assured autonomy and positioning features innovations in applications navigating the sea.

Read Now
Audience watching a presentation at a HxGN Live event

Autonomy & Positioning Reality Summit

See how our precise positioning technologies enable a safe autonomous future at HxGN LIVE Global 2022.
Register Today

High Accuracy, Fast Convergence

Explore the innovative research about our RTK From the Sky technology.
RTK From the Sky
Web_Full_Width_Marquee-NovAtel Marine Banner 02 - 2480x750

SPAN GNSS+INS technology

SPAN technology for hydrographic survey application benefits the marine industry.
Learn More
Web_Full_Width_Marquee-Hexagon_AP_Veripos_Intro-to-GNSS-Book_Home-Page-Banner

An Introduction to GNSS

Our book provides marine users with an introduction to basic GNSS concepts.
Read Now
Web_Full_Width_Marquee-Hexagon_AP_Veripos_LD900_Banner

VERIPOS LD900 Receiver

A quad-band GNSS receiver that delivers precise positioning for demanding marine environments.
Learn More
Previous Next
    Approximate coverage of the Veripos Network Control Centres.

    Coverage

    VERIPOS provides global, dual-beam coverage through our own network.

    View our Coverage
    A person on the bridge of a ship using the phone.

    24/7 Support

    The VERIPOS technical help desk provides expert advice to clients by phone or email – 24 hours a day, 365 days a year.

    Contact Support

    Your VERIPOS Advantage

    As the global leader in GNSS precision positioning technology, the world’s top offshore marine companies trust Hexagon | VERIPOS. Find out why in this video.

    Watch Now
    Satellite depicting coverage lines over a globe at night.

    Services

    VERIPOS offers highly robust precise positioning services for the most difficult offshore marine operating conditions.

    View Services

    Products

    VERIPOS products are approved for marine positioning and navigation, they use cutting-edge technology to provide high-accuracy results

    View Products
    The screen of a Veripos software tool.

    Software

    VERIPOS software provides a range tools to serve your visualisation and processing needs from real-time positioning, quality control and coverage mapping

    View Software

    Latest News

    • Hexagon | VERIPOS expands SPAN GNSS+INS portfolio for dynamic positioning 01 March 2022
    • Hexagon | VERIPOS introduces low SWaP anti-jamming protection and RF interference mitigation for offshore marine vessels 12 October 2021
    • End-of-Life Announcement - LD2 hardware & Verify-DP software 02 September 2021
    Read More

    Contact Us

    • Contact Support
    • Contact a VERIPOS Rep

    Registered Office of VERIPOS Ltd:

    VERIPOS House
    1 B Farburn Terrace
    Dyce, Aberdeen
    AB21 7Dt UK

    Tel: +44 1224 965 800
    sales@veripos.com

    © 2022 VERIPOS
    • Privacy Policy
    • Cookies Policy
    • Cookie Preferences
    • Sitemap
    • Facebook
    • Linked In
    • Twitter