AGRICULTURE
How do I Enable/Disable my Veripos hardware?
I have just changed beams and my station list is not fully populated why is this?
What are the Advantages of Each Veripos Service?
What are the benefits of the Veripos GPS + GLONASS Services?
What are the IDs of the Veripos PPP services (ULTRA, ULTRA2, APEX, APEX2 and APEX5)?
What are the Veripos station ID's and which satellite beams are they available on?
What is the difference between Apex and Ultra corrections?
What is the difference between terms dual beam, dual constellation and dual frequency?
What RTCM messages are used by the Veripos services and what latencies are acceptable?
What satellites are the Veripos services available on and what are the beam frequencies and data rates?
What Veripos beams are available for system's interfaced to Fleet and Fleet Broadband Inmarsat system?
What are the IDs of the Veripos PPP services (ULTRA, ULTRA2, APEX, APEX2 and APEX5)?
The following table lists the ULTRA, ULTRA2, APEX, APEX2 and APEX5 service ID's and what satellite they are available on.
Note: The Station IDs are displayed on the Veripos Unit user interface, the NMEA Station IDs appear on the output NMEA message.
* When Apex5 solutions use less than 5 GNSS constellations, the NMEA Station ID will change according to the number of constellations in-use e.g. 0381 if 3 constellations in-use
Related articles
- What is the difference between Apex and Ultra corrections?
- What RTCM messages are used by the Veripos services and what latencies are acceptable?
- What is the difference between terms dual beam, dual constellation and dual frequency?
- Tides - What Antenna Height should be measured and what accuracy is required? Is this value fixed for the duration of a survey or should it be updated?
- What are the ID's of the Veripos PPP services (ULTRA, ULTRA2, APEX, APEX2 and APEX5)?