How do I select MF or HF Auto Frequency on my LD2?
MF or HF stations may be selected manually on the LD2. However, VERIPOS recommend using the Auto Frequency mode so that the receiver automatically uses the closest stations available.
The Auto Frequency mode can be set as follows:
Press the Page key until Main Menu > Configuration is displayed, then press Enter, followed by Page three times:
If unit displays Beacon Receiver press Enter twice. If unit displays HF/MF Receiver press Enter and then use Toggle to select either MF or HF as required, followed by Page and Enter. Then press repeatedly press Toggle until Auto Freq is shown:
Press Enter to confirm the selection.